Small But Mighty
The Cyan Water Softener has a small footprint at just 59cm tall, 32cm wide and 50cm deep, which allows it to be installed in even the tightest of spaces. This small but mighty system provides excellent value for money thanks to its large 12.5 litre resin capacity, providing up to 2,100 litres* of softened water between cleaning cycles – that’s over 50% more capacity than most water softeners on the market.
*Based on a water hardness figure of 300ppm

Precision Hardness Technology
Employing an efficient metered valve the softener is programmable to your specific water hardness and adjusts according to your daily water usage. This ensures that regenerations only happen when convenient and when required, reducing the amount of water, salt and electricity required for operation – helping to keep running costs to a minimum.

Value For Money
The Cyan Water Softener boasts excellent value for money compared to most other systems on the market, without compromising on quality. Complete with a WRAS approved valve, built in digital display and a comprehensive 2 year warranty, you can rest assured that your home will be fed with high quality softened water for many years to come.

Low Running Costs
Thanks to the precision hardness technology and efficient metered valve, the Cyan requires extremely low levels of energy to operate – comparable to a small alarm clock. The softener is able to adjust its cleaning or regeneration cycles according to your water usage, which ensures every last drop of water is softened before regenerating.

Premium Softening Resin
We only use premium high capacity resin in our range of water softeners. This improves their lifespan and efficiency when compared to systems built with standard softening resin, we’re so confident in our products that we offer a comprehensive 2 year warranty on all of our systems (effective from the date of delivery).

Holiday Mode
Concerned about your water softener whilst on holiday? No problem, we’ve got you covered. Our entire range of electric systems come with holiday mode by default. This means if no water is used for 14 days then the resin bed is cleaned automatically – so whenever you go away, you can come back to clean, luxuriously soft water.

Homes in hard water areas accumulate up to 70kg of limescale per year. This amount of limescale is enough to significantly reduce your homes energy efficiency and can cause considerable damage to your costly appliances if left un-managed. This is where installing a Water Softener can help! Below we’ve listed some of the most common benefits our customers see after purchase.

Save Money On Heating Bills And Repairs

• Save up to £240 a year on rising energy bills and depreciation of home appliances like your boiler
• Feeding your boiler with softened water helps to maintain 100% efficiency over 15 years
• Just 9g of scale reduces your boiler efficiency by up to 5.6%

Save Time On Money And Cleaning

• Reduce cleaning time by up to 10 working days per year
• Use 50% less washing powder on every wash
• Use up to 42% less product when cleaning

Softer Laundry And Brighter Clothes

• Save 100% on the use of fabric conditioner
• Wash at temperatures as low as 30°C and achieve the same results
• Prolong the lifespan and efficiency of your washing machine

Healthier Skin And Softer Hair

• Use up to 50% less shampoo and body wash when washing
• Tackle the cause of dry and dull hair at the source
• Relief from Eczema symptoms

Want To Find Out More Benefits? Click Here

Installation of our Water Softeners require the use of an installation kit, which are available at a discounted price when purchased alongside a system. These kits contain everything required for installation, including inlet and outlet hoses, bypass set, drain hose and water hardness test. When ordering an installation kit it is important that the fittings suit your existing pipework, which is generally either 15mm or 22mm.

Choosing The Right Installation Kit:

15mm Standard Installation Kit 3/4″
Suitable for customers with 15mm pipework and conventional gravity fed or indirect system (cold water tank in loft and hot water cylinder).

15mm Full Flow Installation Kit 3/4″
Suitable for customers with 15mm pipework but have a combi boiler, direct system or an unvented hot water cylinder.

22mm Full Flow Installation Kit 3/4″
Suitable for customers with larger 22mm pipework (common with houses under 10 years old).

Please refer to the product resources tab for installation schematic diagram and product manual

When choosing an Electric Water Softener it is important to consider the following:

• Where You Are Going To Install The Water Softener – The location should have access to a mains water supply, drainage system and a power source. It should also be accessible so that you can easily top up the salt when required.
  
  
• Which Model Suits Your Home – To ensure you choose the right softener you need to know how many people live in the house and the water hardness of your area. If you don’t know your water hardness you can usually find this on your local water boards website or using a water hardness test kit. The hardness of your water and estimated water usage (based on the number of occupants) are what is used to program the valve that controls the regeneration of your softener.
  
  
• Who Is Going To Install It – All of our Water Softeners require an installation kit in order for an effective installation, which are available separately. The installation kits include inlet and outlet hoses, bypass set and a drain hose. When ordering an installation kit you must ensure that the fittings suit your existing pipework which is generally either 15mm or 22mm in the home. Most plumbers are able to install a water softener, however if you have DIY experience then you should be able to install it yourself.
  
  
• Supply Of Salt – Salt is required for the regeneration of your Water Softener. It is important to follow the product manual to ensure the system is not over or under-filled. Keeping the salt level of your system in line with the product manual specification will increase it’s lifespan so is highly recommended. Salt is also available for purchase separately and comes in an easy to use tablet form.

Want to find out exactly how much you could benefit from installing a water softener? Don’t worry we’re here to help. We are pleased to offer a Free Water Hardness Test service which will give you an exact reading in PPM or parts per million, a measure of exactly how hard your water is. We’ll use this information to recommend a system that is suitable for your property. There is no charge for this service, and we’ll dispatch the sample kit straight to your door in just a few days.

Alternatively, Check Out Some Of Our Helpful Guides:

• Considering A Water Softener For Your Home
• What Type Of Water Softener Is Right For Me
• Water Softener Installation Q&A

We’ve Got You Covered
We’re pleased to offer a 2 year warranty on our range of Water Softeners. Our warranty covers the product for two years (from date of delivery) for defective materials and workmanship, when installed and operated within recommended parameters. For more information about our warranty please visit our Warranty Information page or speak to a member of our team.