Herco Compact Commercial RO System
£5,874.00 – £6,600.00
Our Herco Compact Commercial RO System is a freestanding unit suitable for wall mounting or fixing to the floor. The single 4040 membrane option offers permeate flow rates of up to 300 litres per hour, whilst the double 4040 membrane option offers increased permeate production of up to 500 litres per hour. High recovery rates between 75-80% mean less waste water and an average salt rejection figure of 97% make this pumped RO system excellent for a range of pure water production applications.
Why Choose Our Herco Compact Commercial RO System?
- Supplied with 5 micron sediment pre-filter and choice of one or two 4040 RO Membranes
- Wall or floor mountable with a powder coated stainless-steel frame
- Integrated control panel with conductivity meter
- High recovery and rejection rates
Need help with our Herco Compact Commercial RO System? Give us a call on 01622 933 853
Description
These well constructed RO systems are supplied wired and pre-assembled on a stainless-steel frame, ready for installation. Featuring a 5 Micron sediment pre-filter, single or double 4040 membrane, high pressure rotary vane pump with low pressure switch, permeate and concentrate flow meters and RO 524 Controller. The control panel allows for fully automated monitoring of the system, with permeate conductivity display and automatic concentrate flushing after each operating cycle or 24 hours of standby. If you are feeding the system with chlorinated water then suitable carbon pre-treatment is recommended.
Suitable for a feed water TDS of up to 1000ppm and water temperatures of up to 35°C. As with all RO systems the permeate recovery and rejection figures depend on several factors such as feed water quality, temperature and the type of pre-treatment used. If your water hardness is over 100ppm it would be recommended to install a water softener prior to the system to prolong the life of the RO membranes.
How Often Do I Need To Replace The Filters In The Herco Compact Commercial RO System?
The sediment pre-filter should be changed when the gauges show a differential pressure reading of 1.5 bar. The RO membrane should be replaced when you notice a drop in permeate production or quality. With soft water, membranes can last up to 5 years however with extremely hard water (and no pre-treatment) membrane lifespan can be reduced to 12 months or less.
Key Product Information
- 75-80% Average recovery rate
- Integrated booster pump
- Supplied with RO 524 control panel
- Pre-assembled and ready to install
- Permeate and concentrate flow meters
Compatible Products
- 4040 Reverse Osmosis Membranes
- Wound Sediment Filters
- Carbon Block Filters
- Water Softeners
- DI Resin Vessels
Need help with our Herco Compact Commercial RO System? Give us a call on 01622 933 853
Specification
| Suitable For | Light Commercial, Food & Beverage, Restaurants, Humidifiers, Coffee Machines, Steamers, Boats, Caravans, Manufacturing, Steam Generation, Electroplating, Window Cleaning, Car Detailing |
|---|---|
| Supplied With | Powder Coated Stainless-steel Frame |
| Dimensions | Width 400mm, Height 1240mm, Depth 380mm |
| Weight | Single Membrane 55kg |
| Permeate Flow | 300 Litres Per Hour |
| Voltage | 230 V/50Hz |
| Average Rejection Rate | Minimum 97% |
| Recovery Rate | 75-80% |
| Maximum TDS | 1,000 mg/l |
| Water Temperature | Up To 35°C (Ambient Temperature 40°C) |
| Controller | RO 524 |
| Max Operating Pressure | 12 Bar (Feed Water Pressure Min/Max 4/6 Bar) |
| Connections | Permeate/Concentrate Connection: DN10 |
| Conductivity | 1 – 99 μS/cm |
| pH Range | 3-11 |
| Feed Pressure | Minimum 4 Bar |
Related products
-
Spun Bonded Sediment Filters
£3.00 – £20.00 Select options This product has multiple variants. The options may be chosen on the product page -
Water Softener Installation Kits
£69.00 – £260.00 Select options This product has multiple variants. The options may be chosen on the product page -
Granular Carbon Filters
£10.00 – £14.00 Select options This product has multiple variants. The options may be chosen on the product page
