Drinking Water pH Correction System
£60.00
Our Drinking Water pH Correction System is designed to remineralise your drinking water using naturally occurring calcium carbonate, raising the pH to an acceptable level. Suitable for customers with water below pH 7 or as a post-RO filter to improve mineral profile. The pH correction system is supplied as a kit with everything you need to install it on the feed to your existing kitchen tap. Once installed the system is low maintenance, only requiring a filter change when the media is depleted.
Why Choose Our Drinking Water pH Correction Systems?
- Doses water with naturally occurring calcium carbonate
- WRAS approved materials for safe drinking water
- Increases the pH of your drinking water
- Feeds your existing kitchen tap
Need help with our Drinking Water pH Correction System? Give us a call on 01622 933 853
Description
In UK drinking water regulations pH is one of the key parameters, with the acceptable range being between pH 6.5 – 9. Many customers with private water supplies such as boreholes and wells have water that falls below the minimum specified pH, which means pH correction is required to make the water potable. The Drinking Water pH Correction System is an easy to install kit designed to go under your kitchen sink, on the pipework feeding your existing kitchen tap.
Within the kit you will find a clear filter housing, adjusting wrench, wall bracket, screws, remineralisation filter cartridge and two 15mm push fit connections to suit standard UK pipework. Connectors to suit 22mm pipework are available upon request.
How Often Do I Need To Change The Filter?
These filters contain media that dissolves into the water, when the media is almost depleted the filter needs replacing. How long this takes will depend on the pH of your water although it is usually every 6-9 months.
Key Product Information
- Suitable for private water supplies and as a post-RO filter
- Boosts the natural calcium content of your water
- Comes as a kit ready to be installed
- Produces slightly alkaline water
- Easy to change filter cartridge
Compatible Products
Need help with our Drinking Water pH Correction System? Give us a call on 01622 933 853
Specification
| Suitable For | Drinking Water, Home & Office, Domestic, Reverse Osmosis, pH Correction, Private Water Supplies |
|---|---|
| System Contents | 1x 10" Clear Filter Housing (3/4" Ports) |
| Dimensions | Height 315mm |
| Flow Rate | 180 Litres Per Hour |
| End Cap Configuration | Double Open Ended (DOE) |
Resources
Resources Available For The Drinking Water pH Correction System:
You may also like…
-
Spun Bonded Sediment Filters
£3.00 – £20.00 Select options This product has multiple variants. The options may be chosen on the product page -
Clear Filter Cartridge Housings
£3.00 – £118.00 Select options This product has multiple variants. The options may be chosen on the product page -
Carbon Block Filters
£8.00 – £48.00 Select options This product has multiple variants. The options may be chosen on the product page
Related products
-
Water Softener Installation Kits
£69.00 – £260.00 Select options This product has multiple variants. The options may be chosen on the product page -
Azure Domestic Water Softener
£680.00 – £860.00 Select options This product has multiple variants. The options may be chosen on the product page
